Welcome to visit the official website of Shandong Sudiao Intelligent Equipment Co., Ltd.

 中文 | Admin  |  Home

The Practitioner of automation application solutions in the woodworking industry

Customized Production, Super Quality, Worry-Free Service

Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.

News Center

Contact Information

Business Department:

Sales Manager: Juan Liu

Tel : +86-531-88271994

Mob:+86-13305314695

E-mail:sales@sudiao.com

E-mail:juan@sudiao.com 

WhatsApp&weChat:

Juan: 0086-13305314695

Welcome to your consultation and corporation.

Contact us if you're interested in our products or you need technical support.

 

Four Key Techniques for Diagnosing CNC Cutting Machine Faults and Corresponding Remedies!


Release Date:

2026-06-28 12:16

  Believe CNC cutting machine During the manufacturing process, it’s inevitable to encounter minor issues. If these are overlooked, they can significantly disrupt production. Therefore, we encourage everyone to take them seriously. Next, we’ll provide a detailed overview of common malfunctions, methods for diagnosing them, and corresponding solutions, with the hope of offering practical guidance.

 CNC cutting machine

  I. Carving Malfunction

  1. Are the screws in each component loose?

  2. Verify that the path you’re working with is correct.

  3. Could the file be too large, causing processing errors on the computer?

  4. Adjust the spindle speed up or down to suit different materials!

  5. Loosen the tool holder, reorient the tool and clamp it securely, then align the tool properly to ensure a smooth finish on the engraved surface.

  6. Inspect the cutting tool for damage; replace it with a new one and resume engraving. Note: Do not drill holes in the engraving motor housing to mark it, as this will compromise the insulation. If marking is necessary, use adhesive labels instead.

  II. The cutting machine’s overtravel alarm indicates that the machine has reached its limit position during operation. Please check according to the following steps:

  1. Does the designed graphic size exceed the processing limits?

  2. Check whether the connection between the machine’s motor shaft and the leadscrew is loose; if so, tighten the screws.

  3. Whether the machine and the computer are properly grounded.

  4. Does the current coordinate value exceed the soft limit range?

  III. Output Fault of the CNC Cutting Machine

  1. No output; please check that the computer and the control box are properly connected.

  2. In the engraving manager’s settings, check whether the storage is full, and delete any unnecessary files from the manager.

  3. Check whether the signal wiring is loose, and carefully verify that all connections are secure.

  IV. Non-Alarm Faults

  1. Insufficient repeat machining accuracy; check according to item 2 of Clause 3.

  2. If the computer is running but the machine remains stationary, check whether the connector between the computer control card and the electrical cabinet is loose. If it is, firmly reinsert it and tighten the securing screws.

  3. When the machine returns to the mechanical home position, it cannot detect the signal; refer to item 2 for troubleshooting. The proximity switch at the mechanical home position has failed.

  V. When an overtravel alarm is triggered and when the overtravel condition is cleared

  All motion axes are automatically set to jog mode; as long as the manual direction key is held down, the machine will resume continuous motion once it clears the travel limits. When moving the worktable, be sure to move in a direction that keeps it clear of the limit positions. For soft‑limit alarms, you can reset the XYZ coordinates to zero in the coordinate settings.

 CNC cutting machine

  That concludes the explanation from the panel furniture production line manufacturer regarding… CNC cutting machine A detailed overview of fault analysis and solutions from the four major manufacturers—by now, you should have a thorough understanding of engraving-related issues and non‑alarm faults. We sincerely hope this information proves helpful to you!

Keywords:

CNC cutting machine