News Center
Contact Information
Business Department:
Sales Manager: Juan Liu
Tel : +86-531-88271994
Mob:+86-13305314695
E-mail:sales@sudiao.com
E-mail:juan@sudiao.com
WhatsApp&weChat:
Juan: 0086-13305314695
Welcome to your consultation and corporation.
Contact us if you're interested in our products or you need technical support.
CNC cutting machine manufacturers show you how to quickly improve precision!
Release Date:
2026-06-28 12:16
Anyone familiar with panel furniture manufacturers knows that synchronous belts operate under a certain tension, and prolonged use will inevitably lead to some degree of accuracy degradation. CNC cutting machine manufacturer Please note that the cutting machine has extremely stringent precision requirements, so all components must be allocated appropriately.

1. CNC cutting machines typically operate under heavy loads and at high precision:
Its defining characteristic is that the torque required to move the load often exceeds the servo motor’s inherent torque capacity; increasing the servo motor’s output torque via a gearbox can effectively address this issue.
2. Progressive Torque:
One way to increase output torque is to directly boost the servo motor’s torque. However, this approach not only requires expensive high‑power servo motors but also results in a more robust six‑axis drilling structure. The increase in torque is proportional to the rise in control current. At the same time, selecting larger drives, along with correspondingly higher‑rated power electronics and associated electromechanical components, will significantly raise the overall cost of the control system.
3. Increase operating power:
In theory, increasing the power of a servo motor is also one way to boost output torque. The power density of a servo system can be doubled by doubling the servo motor’s rotational speed, without requiring an increase in the specifications of drive and other control‑system components—meaning no additional rated capacity is needed. However, achieving higher torque typically requires the use of a gearbox to distribute and amplify the torque. Therefore, developing high‑power servo motors necessitates the integration of gearboxes, rather than disregarding the requirements of CNC hexagonal drilling machines.
4. Improve application performance:
It is understood that improper load‑inertia matching is one of the causes of unstable servo control. For large load inertia, the equivalent load inertia can be allocated using the inverse square of the reduction ratio, thereby achieving good control response. From this perspective, a gearbox is essentially designed to complement the servo’s control loop.
5. Extend the service life of equipment:
A gearbox can also be used to mitigate the degradation of a motor’s low-speed control performance, as the controllability of a servo motor tends to diminish with decreasing speed—particularly in terms of signal acquisition and current‑control stability at low speeds. Consequently, by incorporating a gearbox, sheet‑cutting machine manufacturers can enable the motor to achieve higher operating speeds.
6. Reduce equipment costs:
Starting from the concept of cost, let’s assume that a 0.4 kW AC servo motor incurs a unit equipment cost of 1, while a 5 kW AC servo motor requires 15 units of cost. However, by selecting a 0.4 kW servo motor and drive, one can configure a gearbox to accomplish the same task—requiring the equivalent of 15 units of cost—thereby reducing operating costs by more than 50%.

Therefore, based on their varying processing requirements, the operators decided to select gear reducers. In general, when machinery operates under conditions requiring low speed, high torque, and high power density, speed reducers are typically chosen. CNC cutting machine manufacturer 。
Keywords:
CNC cutting machine manufacturer