News Center
Contact Information
Business Department:
Sales Manager: Juan Liu
Tel : +86-531-88271994
Mob:+86-13305314695
E-mail:sales@sudiao.com
E-mail:juan@sudiao.com
WhatsApp&weChat:
Juan: 0086-13305314695
Welcome to your consultation and corporation.
Contact us if you're interested in our products or you need technical support.
“Easy to Learn”: How to Troubleshoot the Three Most Common Faults of CNC Cutting Machines?
Release Date:
2026-06-28 12:16
CNC cutting machine During operation, equipment inevitably experiences wear and malfunctions—this is perfectly normal. In fact, minor issues can often be resolved on your own. However, for problems that you cannot handle yourself, avoid attempting repairs blindly. Next, let’s address the common faults that may occur with panel‑cutting machines: don’t worry—Sudiao’s panel furniture production line manufacturer will show you how to resolve them.

1. The cutting machine’s overtravel alarm indicates that the machine has reached its limit during operation. Please follow these steps to troubleshoot:
1. Does the design’s dimensions exceed the processing limits?
2. Check whether the connection cable between the machine’s motor shaft and the leadscrew is loose. If it is, tighten the screw.
3. Are the machine and the computer properly grounded?
4. Whether the current coordinate value exceeds the soft limit range.
5. When a tool overtravel alarm occurs and is subsequently cleared, all motion axes automatically switch to jog mode. As long as the manual direction key remains pressed, the machine will return to normal motion once it moves away from the limit position (i.e., beyond the overtravel limit switch). When moving the worktable, be sure to select a direction that keeps it clear of the limit positions.
II. Output Fault of the Cutting Machine
1. No output—please check that the computer and control box are properly connected.
2. Open the manager’s settings, check whether the storage is full, and delete any unused files in the manager.
3. Check whether the signal cables are loose, and carefully verify that each cable is properly connected.
III. Cutting Machine Malfunction During Material Cutting
1. Check whether the screws in each component are loose.
2. Verify that the path you are working with is correct.
3. Regardless of whether the file is too large, the computer should handle errors.
4. Adjust the spindle speed up or down to suit different materials (typically 8,000–24,000 rpm). Note: For stepless‑speed spindles, the idle speed range may be 6,000–24,000 rpm. Select an appropriate speed based on material hardness, desired machining quality, feed rate, and other factors. Generally, use higher speeds for harder materials, smaller feeds, and fine finishing. In most cases, avoid setting the speed too high to prevent motor overload.
5. Loosen the tool holder, clamp the blade in one direction, and straighten it to ensure the carved surface is smooth.
6. Inspect the cutting tool for damage; replace it and resume material cutting.

Therefore, when the aforementioned issues arise, there is no need to panic; simply follow… CNC cutting machine The method provided by the manufacturer can effectively resolve the issue. If you encounter any problems that cannot be solved, or if you experience any difficulties during use, please feel free to contact us at any time; our technical team will provide you with detailed guidance.
Keywords:
CNC cutting machine