News Center
Contact Information
Business Department:
Sales Manager: Juan Liu
Tel : +86-531-88271994
Mob:+86-13305314695
E-mail:sales@sudiao.com
E-mail:juan@sudiao.com
WhatsApp&weChat:
Juan: 0086-13305314695
Welcome to your consultation and corporation.
Contact us if you're interested in our products or you need technical support.
A woodworking panel‑cutting machine manufacturer shows you how to easily resolve tool runout issues.
Release Date:
2026-06-28 12:16
Woodworking panel cutting machine manufacturer It is known that, during the machining process with a cutting‑off machine, radial runout of the cutting tool may be caused by the radial component of the cutting force acting on the tool. Such runout can lead to bending deformation and machining vibrations, which are among the primary factors affecting workpiece quality. So, how can we minimize radial runout of the cutting tool during machining?

1. Use robust cutting tools, and select larger rake and clearance angles to enhance tool sharpness, reduce friction between the tool and the elastic recovery layer on the workpiece’s transition surface, and lower both the cutting force and vibration. However, excessively large rake and clearance angles can weaken the tool’s strength and impair heat dissipation.
II. Use sharp cutting tools; when machining with sharp tools, the overall feed force is reduced, resulting in a smaller radial cutting force on the tool and thereby minimizing radial runout.
3. Ensure that the cutting tool’s rake face is smooth, which helps reduce chip‑tool friction during machining, thereby lowering the cutting forces and minimizing radial runout of the tool.
4. Use cutting fluids appropriately: cooling-type cutting fluids have little effect on the blanking force, whereas lubricating-type blanking oils can significantly reduce it. Thanks to their lubricating properties, they minimize friction between the rake face and the chip, as well as between the rake face and the workpiece’s transition surface, thereby reducing tool radial runout.

In summary, to minimize radial runout of the cutting tool, it is essential to ensure the tool’s robust construction, sharpness, and smooth surface finish. Additionally, external measures—such as the judicious use of cutting fluids—are crucial for effectively reducing radial runout. We hope this information proves helpful.
Keywords:
Woodworking panel cutting machine manufacturer