Welcome to visit the official website of Shandong Sudiao Intelligent Equipment Co., Ltd.

 中文 | Admin  |  Home

The Practitioner of automation application solutions in the woodworking industry

Customized Production, Super Quality, Worry-Free Service

Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.

News Center

Contact Information

Business Department:

Sales Manager: Juan Liu

Tel : +86-531-88271994

Mob:+86-13305314695

E-mail:sales@sudiao.com

E-mail:juan@sudiao.com 

WhatsApp&weChat:

Juan: 0086-13305314695

Welcome to your consultation and corporation.

Contact us if you're interested in our products or you need technical support.

 

Winter! Don’t overlook these five essential maintenance tasks for your CNC cutting machine!


Release Date:

2026-06-28 12:16

  Rapid carving CNC cutting machine Drawing on 14 years of after-sales experience, the manufacturer has compiled a guide to winter maintenance for panel saws. During customer service visits, we’ve often observed that most users fail to clean their machines promptly after use—particularly during the winter—and neglect to perform regular lubrication.

 CNC cutting machine

  I. Cleanup

  1. After processing, promptly use an air gun to clean the work surface, ensuring both the surface and the machine remain clean and hygienic.

  2. Regularly clean the guide rails, machine frame, wood chips, and other debris to prevent the machine from being obstructed by foreign particles.

  3. Regularly clean the screws of the cutting machine to prevent foreign particles from adhering to them. The lead screw determines the machine’s precision and also plays a crucial role in the transmission process.

  4. Clean the electrical enclosure regularly. Dust is a major threat to circuit boards.

  II. Oiling

  1. First, clean the guide rails and screws; use a lint-free cloth to remove oil stains and material debris from both. Given the low ambient temperature, you can apply lubricant to the guide rails and lead screws—anti‑freeze grease works particularly well.

  2. The refueling schedule is twice a month, or once every two weeks.

  3. If the machine is not used for an extended period, it should be periodically lubricated and drained to ensure the smooth operation of the transmission system.

  4. After refueling, slowly move back and forth to ensure the lubricant is evenly distributed onto the guide rails and lead screws.

  III. Temperature

  1. Ensure the operating environment temperature remains above 0°C.

  2. Verify that all refueling standards specify applicable temperatures, with at least a minimum temperature requirement.

  3. When the machine is not in use, if the room temperature is low, it’s advisable to drain the water from the water tank to prevent the spindle and water pipes from freezing.

  IV. Computer Security Protection

  1. Regularly clean dust from the computer case, ensuring proper cooling; excessive dust can cause malfunctions in industrial control cards.

  2. Regularly defragment the disk to optimize the computer system.

  3. Perform regular virus scans, but be careful not to launch the antivirus program while doing so, as this may cause interference.

  V. Vacuum Pump Issues

  1. Cooling water is essential for the normal operation of the spindle motor. If the cooling water becomes excessively contaminated, it can pose a serious risk to the motor; therefore, ensure that the cooling water remains clean and that the water pump operates properly.

  2. Monitor the water level carefully to prevent the cold-water spindle motor from running dry, which could impede the timely dissipation of heat.

  3. Pay attention to the ambient temperature, and be mindful that the water tank and hoses may freeze and crack due to excessively low water temperatures.

  4. If feasible, the circulating water in the cutting machine’s spindle can be replaced with antifreeze for cooling.

 CNC cutting machine

  In summary, this is rapid sculpting. CNC cutting machine The manufacturer’s technical department has compiled several methods and key considerations for routine winter maintenance. Even top‑notch equipment requires proper care to prevent unnecessary issues, ensuring smooth operations and maximizing efficiency. We encourage everyone to take the maintenance of cutting machines seriously; applying these guidelines in your work will help safeguard our operational effectiveness.

Keywords:

CNC cutting machine