News Center
Contact Information
Business Department:
Sales Manager: Juan Liu
Tel : +86-531-88271994
Mob:+86-13305314695
E-mail:sales@sudiao.com
E-mail:juan@sudiao.com
WhatsApp&weChat:
Juan: 0086-13305314695
Welcome to your consultation and corporation.
Contact us if you're interested in our products or you need technical support.
A CNC cutting‑machine manufacturer shows you how to quickly troubleshoot equipment malfunctions!
Release Date:
2026-06-28 12:15
Through CNC cutting machine manufacturer It is understood that a CNC machine tool is an automated machine equipped with a programmable control system, capable of performing machining operations and producing parts according to a pre‑written program. In the event of a malfunction, operators must follow the prescribed sequence of procedures precisely. Improper operation may result in injury to personnel or damage to the workpieces.

I. Machining Sequence When the Chuck and Workpiece Interfere in a CNC Cutting Machine
When the chuck interferes with the workpiece, immediately press the machine tool’s emergency stop button to halt the current operation, inspect whether the workpiece can be repaired, and then re‑clamp the tool before resuming machining. The required extension length for each tool is typically specified in the machining process sheet generated during programming. By selecting and clamping tools appropriately, interference can be prevented.
II. Machining Sequence When Using the Cutting Tool on the Material-Preparing Machine
When a broken tool is detected, stop material removal, record the current machining sequence number, replace the tool, and, after locating the position immediately preceding the break, resume machining from the original sequence number to restore normal operation.
III. When the cutting machine performs tool-setting and machining in sequence
Immediately press the “Emergency Stop” button on the machine tool to halt the current machining operation. Inspect the workpiece to determine whether it is scrap, then run the spindle at idle for approximately two hours in accordance with the spindle break-in procedure. If a large tool has sustained severe damage, verify that the machine’s accuracy remains intact and have factory‑qualified personnel perform the necessary diagnostics and repairs.

Through CNC cutting machine manufacturer A detailed introduction to addressing three major issues that arise when the chuck of a cutting‑off machine interferes with the workpiece, the machining sequence in such cases, and the appropriate measures to take—hopefully this has provided you with new insights. We also wish to emphasize that, should your equipment encounter a malfunction, it is essential to contact the manufacturer promptly and identify the root cause; only by doing so can you ensure effective repairs and safeguard your production needs.
Keywords:
CNC cutting machine manufacturer