News Center
Contact Information
Business Department:
Sales Manager: Juan Liu
Tel : +86-531-88271994
Mob:+86-13305314695
E-mail:sales@sudiao.com
E-mail:juan@sudiao.com
WhatsApp&weChat:
Juan: 0086-13305314695
Welcome to your consultation and corporation.
Contact us if you're interested in our products or you need technical support.
What preparatory steps are required before and after decommissioning a panel furniture production line?
Release Date:
2026-06-28 12:15
I’m sure those of you in the furniture manufacturing industry are all familiar with it. Panel furniture production line It consists of CNC cutting machines, side-hole drilling machines, edge-banding machines, laminating machines, and other equipment. As CNC‑controlled machinery, routine maintenance extends the machine’s service life and reduces the occurrence of malfunctions. When the equipment is shut down for an extended period, what procedures should be followed to ensure its proper operation upon restart?

I. Pre-Stop Maintenance Procedures for Equipment
1. Power outage
If the equipment is not used for an extended period, be sure to disconnect the power supply to CNC cutting machines, edge banding machines, side-hole drilling machines, and other devices after shutdown, to prevent accidents caused by accidental energization when the workshop is unattended during holidays.
2. Drain the water to prevent freezing
After the machine is shut down, the water in the water‑circulating vacuum pump must be drained. To prevent residual water from freezing and damaging the equipment, appropriate insulation measures should be implemented. In addition, the drained water should be directed to an oil‑water separator, which requires ventilation equipment—such as CNC cutting machines, fully automatic edge‑banding machines, and laser side‑hole drilling machines—to avoid freezing and cracking. If a water‑cooled spindle is used, the coolant should also be drained to prevent ice formation. Similarly, the air tanks of screw chillers or air compressors must be completely drained, and any condensate in the drain valves should be expelled to prevent freezing.
3. Cleaning Equipment
Clean the equipment after shutdown, including the control cabinet, side‑opening tooling, lead screw support, machine bed, motors, vacuum cleaner, and other components and accessories. Additionally, we recommend using a vacuum cleaner to clean critical components such as the control cabinet, to prevent dust generated by compressed air guns from causing short circuits. After cleaning, cover the equipment with a dust‑proof cloth to prevent dust from settling.
4. Oil the surface to prevent rusting
If the equipment remains unused for an extended period during holidays, even after thorough cleaning, it can easily oxidize and rust due to moisture in the air. Therefore, exposed components should be coated with oil to prevent corrosion. This primarily includes guide rails, rack-and-pinion screws, tool holders, and drill‑bit gearboxes, among others.
5. Back up critical data such as software, countertop processing files, document splits, and production software in advance to prevent loss. It is recommended to place several heavy objects on the work surface to prevent deformation of the rigid PVC countertop, which could compromise accuracy.
II. Preparations Before Reuse
1. Pre-Startup Inspection
Startup inspection primarily involves two aspects. First, verify that the workshop’s power supply and air supply are functioning properly. Use a multimeter to measure whether the input voltage of each piece of equipment is within normal limits, and check that the air pressure is stable; any moisture in the air supply should be drained. Second, inspect the vacuum pump. Before starting, add water to the pump and manually rotate the impeller to confirm smooth operation. If it fails to run correctly, check for ice formation or rust; thaw or remove rust as necessary.
2. Apply oil for lubrication
Before operation, inspect each piece of equipment to ensure that the gears and racks are free of rust, and apply lubricant or hydraulic oil. After starting up, take precautions to prevent the equipment from jamming or sustaining damage.
3. Power-on inspection
After startup, manually actuate each motion to verify that the equipment operates normally, including the positioning cylinder, spindle, drilling‑up/down mechanism, and tool‑changing function. Additionally, once powered on, run the motor‑driven spindle in forward rotation (spindle start) at idle for 3–5 minutes. It is also necessary to preheat the drilling unit by running it at idle for 3–5 minutes.
4. No-load operation
Once the preparatory work is complete, do not perform a no-load test run of the machine. Production can then proceed without issue.

I hope the above information is helpful to everyone. Panel furniture production line Manufacturers remind everyone that before putting equipment out of service for an extended period, it is essential to thoroughly clean and maintain it. When restarting the equipment, even more rigorous inspection and maintenance are required.
Keywords:
Panel furniture production line