News Center
Contact Information
Business Department:
Sales Manager: Juan Liu
Tel : +86-531-88271994
Mob:+86-13305314695
E-mail:sales@sudiao.com
E-mail:juan@sudiao.com
WhatsApp&weChat:
Juan: 0086-13305314695
Welcome to your consultation and corporation.
Contact us if you're interested in our products or you need technical support.
A CNC cutting‑machine manufacturer shows you how to effectively mitigate electromagnetic interference!
Release Date:
2026-06-28 12:15
CNC cutting machine manufacturer Please note that, as a CNC-controlled machine, the cutting‑off machine can generate various electromagnetic waves during operation. These emissions may compromise the machine’s stability and interfere with control commands. This is because the housings of typical stepper motors and drivers lack magnetic shielding made from aluminum, titanium, or magnesium alloys, which can disrupt highly sensitive receiving systems, rendering them inoperable, polluting the power supply, disrupting communication between the microcontroller and the host computer of the control system, and even causing the microcontroller to freeze, thereby preventing normal operation. Therefore, it is essential to address these interference issues. So, how can we effectively mitigate electromagnetic interference in cutting‑off machines?

1. Install a power line filter to reduce pollution of the AC power supply.
2. The “single-point grounding” principle: Connect the power supply filter’s ground wire, the drive’s PE (protective earth) terminal (with the drive electrically isolated from the chassis baseplate), the output leads following the control pulses—specifically the direction pulse DIR—to a common point; also connect the motor’s grounding wire, the cable shield between the drive and the motor, and the drive’s shielding wire to the grounding post on the chassis wall, ensuring good electrical contact.
3. Maximize the separation between the control wiring and the power lines (L, N) as well as the motor drive leads (U, V, W), and avoid any crossings. For example, in a dual‑axis drive system, when positioning two drives on the same chassis, orient one with its nameplate facing forward and the other facing backward, and keep all connecting leads as short as possible during the mechanical layout.
4. Use shielded cables to reduce external interference or prevent your own (power) cables from causing interference to the surrounding environment.

Through the above, that is… CNC cutting machine manufacturer A detailed introduction to four distinct approaches for effectively mitigating electromagnetic interference can help prevent the electromagnetic emissions generated by cutting machines from compromising their operational stability. In addition, users should pay attention to the external environment surrounding the equipment and keep it away from other devices or areas prone to generating magnetic fields.
Keywords:
CNC cutting machine manufacturer