News Center
Contact Information
Business Department:
Sales Manager: Juan Liu
Tel : +86-531-88271994
Mob:+86-13305314695
E-mail:sales@sudiao.com
E-mail:juan@sudiao.com
WhatsApp&weChat:
Juan: 0086-13305314695
Welcome to your consultation and corporation.
Contact us if you're interested in our products or you need technical support.
Four essential precautions you must not overlook when connecting the grounding wire of a CNC cutting machine!
Release Date:
2026-06-28 12:14
The grounding wire is one of the indispensable safety measures in electrical equipment. CNC cutting machine During operation, this must not be overlooked; ensure proper connection and use of the grounding wire, and always follow standardized procedures, as this is closely linked to the safe use of the panel saw. When connecting the grounding wire to the panel saw, the following four points must never be ignored!

I. Precautions for Installing, Disconnecting, and Reconnecting the Cutting Machine
1. When installing the grounding wire: first connect the grounding clamp, then connect the electrical clamp; when removing the grounding wire, first remove the electrical clamp, then remove the grounding clamp.
2. Installation: Secure the double‑eye copper terminals on the phase conductors of the grounding flexible copper wire to the corresponding positions on the power‑supply terminal clamps (both fixed and movable) of the grounding rod; then attach the single‑eye copper terminals on the phase conductors to the grounding conductor of the grounding clamp or grounding spike, thereby forming a complete grounding system.
3. Verify that the voltage level of the grounding rod matches the voltage level of the operating equipment.
4. Grounding flexible copper wires are available in phase‑separated and combined types, while grounding rods come with either flat‑mouth or double‑spring‑hook clamps.
II. Before commencing work, the grounding wire must be inspected.
Check whether the flexible copper wire is broken, whether the screw terminals are loose, and whether the wire hooks retain their elasticity. Any components that fail to meet the requirements must be replaced or repaired before being put back into service.
III. Preparations Required Before Connecting the Grounding Wire to the Cutting Machine
1. Power must be supplied in advance; hanging a grounding wire when there is no power is a common, habitual violation at the grassroots level. When installing the grounding wire, the body must not come into contact with it.
2. Verify that the voltage level of the grounding rod matches the voltage level of the operating equipment.
3. Grounding conductors shall be connected at both ends of the work area to prevent the risk of back‑feeding and induced voltages. Numerous incidents have demonstrated the serious consequences of failing to do so.
IV. Precautions During the Use and Maintenance of the Material‑Cutting Machine’s Grounding Wire
1. Grounding electrodes must be capable of rapidly conducting large fault currents to ensure reliable grounding.
2. Protect the grounding conductor. During use, the grounding conductor must not be twisted. When not in use, it should be coiled with flexible copper wire. After removal, the grounding conductor must not be dropped from height or thrown carelessly; it should be transported using a rope, and its cleanliness must be maintained.
3. Taking into account the effects of grounding‑wire swing, the safety clearance between installed grounding conductors and energized equipment shall not be less than the values specified in the newly revised “Electric Power Safety Work Procedures.”
4. Select grounding conductors of the appropriate specification based on the voltage level.
5. The use of any other metal wire as a grounding conductor is strictly prohibited.

In summary, as long as we carry out installation in strict accordance with established procedures and standards, and follow… CNC cutting machine Proper operation and strict adherence to the code of conduct for electrical equipment not only enhance the safety performance of the cutting machine but also improve processing efficiency.
Keywords:
CNC cutting machine