Welcome to visit the official website of Shandong Sudiao Intelligent Equipment Co., Ltd.

 中文 | Admin  |  Home

The Practitioner of automation application solutions in the woodworking industry

Customized Production, Super Quality, Worry-Free Service

Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.

News Center

Contact Information

Business Department:

Sales Manager: Juan Liu

Tel : +86-531-88271994

Mob:+86-13305314695

E-mail:sales@sudiao.com

E-mail:juan@sudiao.com 

WhatsApp&weChat:

Juan: 0086-13305314695

Welcome to your consultation and corporation.

Contact us if you're interested in our products or you need technical support.

 

How can you resolve the three most common malfunctions of CNC cutting machines? Why not come in and learn!


Release Date:

2026-06-28 12:14

  When using CNC cutting machine During operation, many operators encounter common minor issues. However, if these small problems are left unresolved, they can escalate into major ones. So how can you promptly address malfunctions with your cutting‑machine? Below, I’ll provide a detailed overview of relevant knowledge—covering typical fault‑diagnosis methods and troubleshooting solutions—with the hope of being helpful to you.

 CNC cutting machine

   I. Processing Exceeds Limits

  Cause: This issue typically occurs when the sum of the “physical coordinate position” of the machining origin and the “dimensions specified in the machining file” exceeds the configured “soft limits.”

  Diagnosis method: After the user defines the workpiece origin, during machining, the X-axis or Y-axis exceeds its travel limit in a particular direction.

  Solution: Re-select an appropriate machining origin.

   II. Processing Abnormality Interrupted

  Cause: The user-defined soft limit area is smaller than the machine tool’s actual machining area.

  Diagnostic method: The system can start processing normally, but an abnormal interruption occurs after a period of operation.

  Solution: The soft limit area is larger than the machine tool’s actual machining area.

   III. System Crash

  1. Cause: Voltage fluctuations

  2. Troubleshooting steps: If the screen displays a normal prompt but the readings stop updating and pressing any key has no effect; or if the screen shows “Entering power‑off protection mode—your power‑off protection settings may not match the supply voltage”; or if, during manual operation, the screen indicates “Entering power‑failure protection mode—your power‑failure protection settings may not match the supply voltage”; or if the screen simply displays the current operating status with no response to any key presses.

  3. Solution: This issue typically occurs during voltage fluctuations, similar to what happens with power‑off protection. Screen prompts only appear when the voltage variations are minor; however, if the fluctuations are excessive, the reset circuitry of the power‑management chip on the control card triggers, preventing the display from functioning. Adjusting the control card’s operating voltage to 5.3 V generally resolves this problem.

 CNC cutting machine

  The above issues are CNC cutting machine These issues are unavoidable during the machining process. To better preserve the cutting machine’s operational performance, it is essential to maintain sound operating and maintenance practices. There are many other considerations when using a cutting machine; we will introduce them to you in due course, hoping they prove helpful.

Keywords:

CNC cutting machine