News Center
Contact Information
Business Department:
Sales Manager: Juan Liu
Tel : +86-531-88271994
Mob:+86-13305314695
E-mail:sales@sudiao.com
E-mail:juan@sudiao.com
WhatsApp&weChat:
Juan: 0086-13305314695
Welcome to your consultation and corporation.
Contact us if you're interested in our products or you need technical support.
Four Major Malfunctions of CNC Cutting Machines and Their Solutions!
Release Date:
2026-06-28 12:13
CNC cutting machine In daily operations, certain issues are inevitable—some stem from the machine’s configuration, while others result from operator error. This article provides a detailed overview of the common causes and solutions for problems encountered with cutting machines. If you’d like to learn more, please read on!

1. The cutting machine emits an abnormal sound upon startup, or the main limit switch is damaged.
Reason:
1. If you cannot press the limit switch, aim at it.
2. If the drive wire has poor contact, secure it in place.
3. The limit switch wiring is not properly connected; please connect the wires correctly.
4. If the limit switch is damaged, please replace it.
II. During operation, the spindle motor of the cutting machine suddenly stops or rotates slowly.
Reason:
1. If the operating voltage is unstable or overloaded, install a voltage regulator.
2. Check that the centerline connection is secure and that there is no solder loss at the threaded ends.
3. When setting the origin, the tool may sometimes move forward or to the right, with an indeterminate offset distance.
Reason:
1. The limit switch has failed. When the system returns to its home position, the limit switch repeatedly opens, closes, and resets. Simply replace the limit switch.
2. The drive wire has become loose, so try tightening it.
4. The cutting machine cannot engrave at the origin.
Reason:
1. Does the file’s layout size match the machine?
2. Check for any misalignment and verify that the layout settings are correct.

CNC cutting machine Improper operation and inadequate maintenance, combined with prolonged use, can inevitably lead to malfunctions. When faults occur, they must be addressed promptly. It is also important to remind users not to undertake repairs blindly; instead, they should consult the equipment manufacturer or qualified technicians to ensure optimal equipment performance.
Keywords:
CNC cutting machine