Welcome to visit the official website of Shandong Sudiao Intelligent Equipment Co., Ltd.

 中文 | Admin  |  Home

The Practitioner of automation application solutions in the woodworking industry

Customized Production, Super Quality, Worry-Free Service

Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.

News Center

Contact Information

Business Department:

Sales Manager: Juan Liu

Tel : +86-531-88271994

Mob:+86-13305314695

E-mail:sales@sudiao.com

E-mail:juan@sudiao.com 

WhatsApp&weChat:

Juan: 0086-13305314695

Welcome to your consultation and corporation.

Contact us if you're interested in our products or you need technical support.

 

How can the three most common malfunctions of CNC cutting machines be resolved? This article provides the correct answers.


Release Date:

2026-06-28 12:13

  Many customers are using it. CNC cutting machine Occasionally, unexpected malfunctions may occur—ranging from alarm‑triggering issues to non‑alarm‑related faults. How can these be resolved? To help, Sudo CNC has analyzed some of the most common problems:

 CNC cutting machine

   Fault 1: Shearing machine overtravel alarm and reset

  1. All motion axes are automatically set to the micro‑movement mode. As long as the manual direction key is held down, the machine can resume its connected motion state at any time when it leaves its home position (i.e., the overtravel limit switch).

  2. When moving the worktable, pay attention to the direction of movement and keep it clear of restricted areas.

  3. The limit alarm must allow the XYZ coordinates to be reset to zero in the coordinate settings.

  Fault

   Fault No. 2: Non-alarm fault of the cutting machine:

  1. Repeated machining accuracy is insufficient; refer to the second item in the previous checklist.

  2. When the computer is running but the machine remains stationary, check whether the connector between the computer control card and the electrical cabinet is loose. If so, firmly insert it and tighten the securing screws.

  3. When the cutting machine returns to its mechanical home position, it cannot detect the signal. Perform the following checks: the proximity switch for the mechanical home position is malfunctioning.

   Fault 3: Cutting machine alarm fault:

  Overtravel alarm: The cutting machine has reached its travel limit during operation. Please perform the following checks:

  1. Does the size of the designed graphic exceed the processing limits?

  2. Check whether the connection cable between the motor shaft and the cutting machine’s leadscrew is loose. If so, tighten the screw.

  3. Are the cutting machine and the computer properly grounded?

  4. Whether the current coordinate value exceeds the soft limit range.

 CNC cutting machine

  If CNC cutting machine If a malfunction occurs during operation, do not panic and refrain from disassembling the cutting machine. Follow the steps outlined above to systematically troubleshoot and identify the root cause, then address it. Alternatively, you may contact the equipment manufacturer for technical support and troubleshooting assistance.
 

Keywords:

CNC cutting machine