News Center
Contact Information
Business Department:
Sales Manager: Juan Liu
Tel : +86-531-88271994
Mob:+86-13305314695
E-mail:sales@sudiao.com
E-mail:juan@sudiao.com
WhatsApp&weChat:
Juan: 0086-13305314695
Welcome to your consultation and corporation.
Contact us if you're interested in our products or you need technical support.
The main reasons for non-compliant processing of板材 by woodworking panel-cutting machines are as follows:
Release Date:
2026-06-28 12:13
Woodworking panel saw It is a highly popular type of processing equipment in today’s panel furniture market, capable of enhancing the precision of processed panels. However, during operation, panel deviations can still occur. Do you know what the specific causes are? How much do you really understand about this issue? Next, we’ll provide a detailed summary for you.

1. The sharpness of the tool
A cutting machine primarily relies on its cutting tools to perform material cutting, and the sharpness and condition of these tools can significantly affect the surface roughness of the cut. If the tool lacks sufficient sharpness, the workpiece may chip or break immediately. Moreover, when the tool is in poor condition, it is advisable not to cut at excessively high speeds.
2. Differences in board strength
The middle layer of the panel‑cutting machine uses high‑density board and plywood. Both materials offer good strength, but due to their low cost and ease of production, they are widely employed in custom furniture manufacturing. However, these two types of panels share a common drawback: they are manufactured using a pressed‑board process, meaning they are not monolithic. If the adhesive bond is insufficient, the edges may collapse during cutting.
3. Spindle bearing speed ratio
This is akin to having a sharp cutting tool. If the spindle bearing’s speed ratio is insufficient, the板材 fed into the cutting machine will exhibit abnormalities, such as chipping along the edges. The spindle bearing’s rotational speed should exceed the set speed; however, care must be taken not to adjust the speed within the range that could damage the tool.
4. The negative effects of vacuum pump adsorption are very poor.
Some manufacturers’ vacuum pumps used in panel‑cutting machines do not provide strong suction on cabinet countertops. In CNC wood‑panel cutting machines, steel components may fail to adhere securely during processing, causing the板材 to shift—this is also a common cause of chipping along the edges. The suction holes on the worktable indirectly hold the板材 in place. This type of suction table has an even more pronounced adverse effect: the board support brackets can double the average suction force, significantly improving the precision of panel cutting.
5. Tool clamping is insecure.
If the cutting machine’s tool alignment is not secure, it can lead to edge chipping of the板材 and damage to the cutting tools during the material processing workflow.

The above content has been summarized in detail. Woodworking panel saw The reasons for non‑compliant machining of sheet materials reveal that the primary factors are tool sharpness, variations in material strength, spindle bearing speed ratios, adverse effects of vacuum pump suction, and unstable tool clamping. We hope this information proves helpful!
Keywords:
Woodworking panel saw