News Center
Contact Information
Business Department:
Sales Manager: Juan Liu
Tel : +86-531-88271994
Mob:+86-13305314695
E-mail:sales@sudiao.com
E-mail:juan@sudiao.com
WhatsApp&weChat:
Juan: 0086-13305314695
Welcome to your consultation and corporation.
Contact us if you're interested in our products or you need technical support.
Woodworking panel‑cutting machine manufacturers advise: Master the following maintenance tips to extend your equipment’s lifespan.
Release Date:
2026-06-28 12:13
The advent of woodworking panel-cutting machines has made custom furniture production much easier. Woodworking panel cutting machine manufacturer Reminder: If you want your equipment to last longer, be sure to perform proper maintenance. Do you know what the daily maintenance requirements are for a cutting machine? How much do you know about this? Let’s take a look next!

1. Check all guide rails, racks, and limit switches for foreign objects. Obstructions can cause excessive wear on gears and joints, thereby reducing machine accuracy.
2. Verify that the rack‑and‑pinion engagement is normal. In particular, check whether the motor is loose, as this can cause the machine to lose synchronization during material cutting.
3. The front and rear gears and racks of the gantry frame are in normal condition.
4. Cleaning the dust from the main electrical cabinet and the internal cooling motor is straightforward—much like dusting a computer.
5. Has the dust inside the dust collection hood beneath the machine spindle been removed?
6. For the air‑source trio (oil‑water separator), check whether the oil cup contains sufficient oil and whether the lubricated guide rails are adequately oiled. The primary function of the oil‑water separator is to remove moisture and impurities from the oil, thereby reducing injector malfunctions and extending the engine’s service life. When applying lubricant to small components such as tracks, use a needle or a small oiling bottle.
7. When the emergency stop switch is functioning properly but the machine is malfunctioning, an emergency stop may be forcibly activated to prevent secondary injuries.
8. Inspect the radiators of each motor for dust and foreign objects.
9. Check that the pressure readings on all air pressure gauges are normal. By interpreting the gauge readings, you can diagnose or prevent potential machine malfunctions.

The above is Woodworking panel cutting machine manufacturer A detailed summary has been prepared on the key aspects of routine maintenance for cutting‑to‑size equipment. During daily operation, users should perform appropriate maintenance based on specific conditions to prevent malfunctions and extend the equipment’s service life. We sincerely hope this information will help everyone maintain their cutting‑to‑size machines correctly.
Keywords:
Woodworking panel cutting machine manufacturer