News Center
Contact Information
Business Department:
Sales Manager: Juan Liu
Tel : +86-531-88271994
Mob:+86-13305314695
E-mail:sales@sudiao.com
E-mail:juan@sudiao.com
WhatsApp&weChat:
Juan: 0086-13305314695
Welcome to your consultation and corporation.
Contact us if you're interested in our products or you need technical support.
Are there burrs during material cutting and processing? A CNC cutting machine manufacturer shows you how to handle this properly.
Release Date:
2026-06-28 12:13
Currently, an increasing number of panel furniture manufacturers are turning to CNC wood‑cutting machines for production. When operating these machines, a common issue arises: the cut edges of the panels often exhibit burrs, compromising both the product’s appearance and its usability. What causes this problem? Let’s find out. CNC cutting machine manufacturer I’ll give you the answer!

I. Sharpness of the Cutting Tool
The sharpness of the cutting‑tool blades on a cutting machine significantly affects the surface finish of the板材. With prolonged use, some blades become dulled, their sharpness is greatly reduced, and burrs naturally appear.
II. Material Issues
In the furniture manufacturing industry, in addition to solid wood, there are also MDF and particleboard, both of which have very high hardness. If the adhesion of the material being processed is insufficient, burrs or chipped edges are likely to occur during machining.
III. Insufficient Spindle Speed
Spindle speed is also a critical factor affecting the quality of sheet‑material machining, much like the principle governing cutting tools. If the speed is too high, it can lead to a mismatch between the cutting speed and the feed rate, resulting in uneven cuts, burrs, and chipping along the edges.
IV. Poor Vacuum Suction Force
Many small manufacturers produce panel‑cutting machines with vacuum tables that lack sufficient suction, failing to securely hold the workpiece during processing. If the sheet material shifts during machining, it can directly compromise the quality of the cut. Moreover, this issue not only leads to burr formation but may even render the machine inoperable.
5. Tool clamping is insecure.
The cutting tool on the material‑cutting machine is not securely clamped; during machining, tool vibration can cause edge chipping on the sheet material and damage to the tool itself.

Through CNC cutting machine manufacturer Through an analysis and summary of the primary factors contributing to burrs on板材 produced by cutting machines, we have identified that tool quality, raw materials, the spindle, vacuum suction force, and tool clamping can all lead to burr formation. We hope this information proves helpful!
Keywords:
CNC cutting machine manufacturer