Welcome to visit the official website of Shandong Sudiao Intelligent Equipment Co., Ltd.

 中文 | Admin  |  Home

The Practitioner of automation application solutions in the woodworking industry

Customized Production, Super Quality, Worry-Free Service

Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.

News Center

Contact Information

Business Department:

Sales Manager: Juan Liu

Tel : +86-531-88271994

Mob:+86-13305314695

E-mail:sales@sudiao.com

E-mail:juan@sudiao.com 

WhatsApp&weChat:

Juan: 0086-13305314695

Welcome to your consultation and corporation.

Contact us if you're interested in our products or you need technical support.

 

The Six Major Causes of Material-Positioning Errors in CNC Cutting Machines


Release Date:

2026-06-28 12:12

   CNC cutting machine During the material‑cutting process, various misalignment faults can occur, such as lateral misalignment, vertical misalignment, X‑axis misalignment, and Z‑axis misalignment. What causes these misalignment issues? If you’d like to learn more, please read on—this information is intended to help you effectively resolve equipment misalignment problems.

 CNC cutting machine

  1. Issues with the drive: Problems inherent to the drive’s design or its electronic components can also cause misalignment; this is a common cause. If such errors occur infrequently and the speed is only slightly reduced, material cutting may still proceed normally, indicating that the drive is not completely failed. However, if the wood‑cutting process consistently starts off in the wrong position, it suggests that the drive is entirely defective.

  2. Voltage issues: The cutting machine requires substantial power during operation. If the voltage is too low, the drive’s power supply may be insufficient, leading to misalignment. In such cases, Y-axis misalignment is typically the primary cause. This phenomenon can occur due to inadequate external voltage or because other high‑power devices, such as arc welders, are being used on the same circuit.

  3. Issues with the interface board, motherboard, and adapter board of the cutting machine: If these boards are cracked or broken, the machine will fail to move in a consistent direction or along all three axes during operation, resulting in misalignment of the cut.

  4. Issue with the cutting machine’s spindle motor: If it is a stepper motor or a servo motor, the entire machine will fail to move in any direction, and the manual lead screw will also remain stationary.

  5. Issues with the cutting machine itself: Faulty or loose components, as well as surface contaminants, can also lead to misalignment. If the coupling is loose or broken, misalignment will occur. Failure to clean and lubricate the machine regularly over an extended period can cause misalignment of the guide rails and lead screws. Additionally, a broken machine‑tool cable can result in misalignment.

  6. Poor contact in the connection control cables of various components of the cutting machine (power supply control cables and transmission lines).

 CNC cutting machine

  cause CNC cutting machine The primary causes of misalignment typically stem from the drive, power supply, interface board, motherboard and adapter board, spindle motor, and other components. We hope this information helps you promptly resolve equipment misalignment. For more insights into CNC equipment maintenance, please stay tuned for updates on our website!

Keywords:

CNC cutting machine manufacturer