Welcome to visit the official website of Shandong Sudiao Intelligent Equipment Co., Ltd.

 中文 | Admin  |  Home

The Practitioner of automation application solutions in the woodworking industry

Customized Production, Super Quality, Worry-Free Service

Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.

News Center

Contact Information

Business Department:

Sales Manager: Juan Liu

Tel : +86-531-88271994

Mob:+86-13305314695

E-mail:sales@sudiao.com

E-mail:juan@sudiao.com 

WhatsApp&weChat:

Juan: 0086-13305314695

Welcome to your consultation and corporation.

Contact us if you're interested in our products or you need technical support.

 

CNC cutting‑machine manufacturers show you how to properly troubleshoot issues such as spindle reverse rotation and limit switches.


Release Date:

2026-06-28 12:12

  In recent years, the furniture industry has become extremely popular. Many panel‑type furniture manufacturers have replaced traditional production methods with CNC cutting machines, which operate at high speeds and require precise machining. As a result, malfunctions during the processing of door frames and cabinet doors are inevitable. Common issues include spindle reversal and limit switch failures. So, do you know what causes spindle reversal and what other typical problems might arise? How much do you really understand about these matters? Let… CNC cutting machine manufacturer Here’s a detailed summary for everyone.

 CNC cutting machine manufacturer

   I. The phenomenon of the cutting machine spindle reversing.

  During operation, if the main spindle of the cutting machine reverses, it is due to the inverter being connected to the spindle in reverse; you can simply swap any two of the three connections.

  When the spindle reverses, if you’re cutting medium-density fiberboard, the cutter may break; during installation, the cutter could also snap. Sometimes, even if it’s not damaged, it can overheat and turn red. Therefore, if such an abnormality occurs, stop the machine and inspect the spindle.

  When using a cutting‑to‑size machine in production, avoiding errors is a major concern for many customers. Incorrect settings of the cutting path or improper operation can easily lead to problems, resulting in wasted板材—material that is often very expensive. Even a small mistake can translate into significant losses.

  Another issue is material waste, as many customers use high‑cost板材; even a minor mistake can result in the entire sheet being discarded. Consequently, minimizing cutting errors on panel‑cutting machines is a common challenge for everyone. Here’s a tip from tool manufacturers: leveraging the machine’s control system can help eliminate cutting inaccuracies.

   II. Fault Analysis of the Cutting Machine.

  During the material‑cutting process on the cutting machine, 1) the limit switch was suddenly triggered; 2) the work envelope was exceeded.

  Causes: 1. Mechanical and interference‑induced triggering of the limit switches; 2. Failure to return to the machine’s home position before starting machining, resulting in machining parameters that exceed the machine’s specified workpiece dimensions.

   Solution:

  1. Check whether the limit switch’s sensing point is making metal contact. If metal contact is present, the issue can be resolved. If there is no metal contact, inspect the limit switch’s wiring to address any short circuits, thereby eliminating the fault. If none of the above causes apply, examine for line interference; wrap the limit switch leads with a magnetic core to mitigate demagnetization.

  2. After the machine triggers a soft‑limit alarm, it will automatically stop operating. At this point, please select “Return to Machine Home” from the “Operation” menu in the control system, reset all three axes, and then resume positioning and material cutting; the issue will be resolved.

 CNC cutting machine manufacturer

  The above CNC cutting machine manufacturer We have already discussed the issues and common malfunctions of the panel saw spindle, and we believe that after reading this, you will have a clearer understanding. From this, we can see that if the panel saw spindle reverses, it is essential to conduct a thorough inspection; should any problems arise, a careful wiring check is required to prevent equipment failures that could disrupt normal operation.

Keywords:

CNC cutting machine manufacturer