Welcome to visit the official website of Shandong Sudiao Intelligent Equipment Co., Ltd.

 中文 | Admin  |  Home

The Practitioner of automation application solutions in the woodworking industry

Customized Production, Super Quality, Worry-Free Service

Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.

News Center

Contact Information

Business Department:

Sales Manager: Juan Liu

Tel : +86-531-88271994

Mob:+86-13305314695

E-mail:sales@sudiao.com

E-mail:juan@sudiao.com 

WhatsApp&weChat:

Juan: 0086-13305314695

Welcome to your consultation and corporation.

Contact us if you're interested in our products or you need technical support.

 

How can you address excessive noise from a CNC cutting machine? Try the following methods!


Release Date:

2026-06-28 12:11

   CNC cutting machine It is currently one of the more intelligent production devices used by panel furniture manufacturers. When operating a panel‑cutting machine, significant noise can have serious adverse effects on both operators and the surrounding environment. If such noise issues arise, effective noise‑reduction measures must be implemented. Next, we will introduce some solutions: 1. Gear‑precision control for panel‑cutting machines: The basic requirements for gear precision are as follows: Based on practical experience, when gears operate at linear speeds exceeding 20 m/s, their pitch deviation, radial runout tolerance, and helix‑angle tolerance should consistently meet Grade 7 accuracy. Once the gears reach Grade 7, special attention should be paid to the shuttle‑type teeth and strict adherence to the tooth‑root fillet dimensions.

 CNC cutting machine

  2. Control the quality of raw materials used in the cutting machine: High-quality raw materials are the foundation for producing high‑quality products. Regardless of the method, once the materials arrive at the factory, they must undergo rigorous testing of chemical composition, particle size analysis, and purity assessment. The goal is to promptly correct heat‑treatment‑induced deformation and enhance the quality of gear‑tooth machining.

  3. Preventing heat‑treatment distortion in the blank‑cutting machine: After rough machining, the gear blanks undergo finish forging, normalizing, or quenching and tempering to achieve:

  (1) Cut the softened steel parts to size;

  (2) Eliminate residual stresses;

  (3) Refine the grain structure, improve the microstructure, and enhance the mechanical properties of the steel.

  (4) It should be noted that during normalizing or machining, the furnace temperature must be kept uniform, and workpieces should be heated and cooled evenly in their working positions using appropriate tools. Stacking is strictly prohibited. For gears requiring drilling to reduce weight, the drilling sequence should be scheduled after heat treatment. Heat treatment employs high-frequency quenching of the gear tooth surfaces to minimize part distortion. The tooth surfaces obtained after high-frequency quenching exhibit high strength, hardness, wear resistance, and fatigue resistance, while the core retains sufficient ductility and toughness, thereby reducing deformation. High-frequency quenching of the tooth surfaces should be carried out at a low quenching temperature, with short heating times, uniform heating, and slow cooling.

  4. Ensure the precision of the CNC tool blank: The dimensional accuracy of the gear bore should be centered around the midpoint of the bore’s tolerance range, set at 0.003 to 0.005 mm. If the deviation falls within the specified design tolerances, the blank shall be sorted and transferred to the gear‑cutting process. The end‑face runout and radial runout of the blank shall meet Grade 6, with tolerances ranging from 0.01 to 0.02 mm.

 CNC cutting machine

  In short, to resolve CNC cutting machine To address noise issues, it is essential to conduct thorough inspections of all materials processed by the cutting machine. In particular, gear and heat‑treatment checks are indispensable for ensuring the dimensional accuracy of gear blanks, thereby guaranteeing the equipment’s reliable operation.

Keywords:

CNC cutting machine