News Center
Contact Information
Business Department:
Sales Manager: Juan Liu
Tel : +86-531-88271994
Mob:+86-13305314695
E-mail:sales@sudiao.com
E-mail:juan@sudiao.com
WhatsApp&weChat:
Juan: 0086-13305314695
Welcome to your consultation and corporation.
Contact us if you're interested in our products or you need technical support.
CNC cutting machine manufacturers guide you on how to properly perform tool setting during operation.
Release Date:
2026-06-28 12:11
CNC cutting machine manufacturer Please note that tool setting is not only an important step in operating a CNC panel saw, but also a critical one; therefore, machine operators must master the correct tool‑setting procedure. To learn the proper tool‑setting process for a panel saw, please read the following!

Cutting machines can be categorized into manual tool setting and automatic tool setting. Automatic tool setters are typically equipped with a tool magazine, rack‑type tool changers, or disc‑type tool changers. The automatic tool setter is controlled by software, which automatically adjusts the initial positions of both the cutting tool and the workpiece. Manual tool setting requires the operator to use a feeler block to manually adjust the workpiece’s position.
The function of a tool setter on a cutting machine is to automatically align the tool’s initial orientation with that of the workpiece. However, this task is typically performed manually by skilled operators. Currently, most commercially available tools are portable setups that can be placed directly on the machine table. On the one hand, such devices are easier for users unfamiliar with the machine to learn and operate; on the other hand, they facilitate locating reference points and eliminate the need to measure tool depth manually.

CNC cutting machine manufacturer It should be noted that tool‑setting accuracy directly affects machining precision. Therefore, tool setting must be performed with great care, and the method chosen should match the required machining accuracy of the part. When working with different sheet materials, pay attention to selecting an appropriate tool‑setting force and spindle power, and take into account the solid wood’s thickness, hardness, and other material properties. A higher‑power, harder‑grade spindle is recommended for harder materials, while a lower‑power, softer‑grade spindle is suitable for softer materials.
Keywords:
CNC cutting machine manufacturer