News Center
Contact Information
Business Department:
Sales Manager: Juan Liu
Tel : +86-531-88271994
Mob:+86-13305314695
E-mail:sales@sudiao.com
E-mail:juan@sudiao.com
WhatsApp&weChat:
Juan: 0086-13305314695
Welcome to your consultation and corporation.
Contact us if you're interested in our products or you need technical support.
Don’t panic if the edges of your sheet‑metal parts processed by a CNC cutting machine have burrs—here’s a step‑by‑step guide to help you fix it.
Release Date:
2026-06-28 12:10
CNC cutting machine It is widely used in panel furniture manufacturing, yet several issues frequently arise during the cutting process, such as burrs and chipping along the edges—common problems that many of us encounter. What causes these phenomena? Below, we’ll provide a detailed summary to help you prevent these issues in future operations and applications.

I. Causes of burrs on the edges of板材 processed by the cutting machine:
1. The sharpness of the cutting tool
The cutting machine uses various cutting tools, and the sharpness of these tools indirectly affects the surface roughness of the cut. If the tools are not sufficiently sharp, the material may chip or splinter upon切入; therefore, it is not advisable to cut too quickly when the tools are in poor condition.
2. Material issues with the板材
The板材 used for cutting raw materials include MDF and particleboard. Both types of boards have relatively high hardness. However, they share a common drawback: they are both manufactured by pressing, meaning they are not monolithic. If the bonding strength is insufficient, the edges are likely to collapse during cutting.
3. Spindle speed of the cutting machine
It’s the same as with tool sharpness. If the spindle speed is too low, the material being cut by the tool will exhibit abnormalities, such as chipping along the edges. When the spindle speed is set to its maximum, adjustments should be made within a range that does not compromise tool utilization.
4. The clamping rigidity of the cutting tool
If the tool-setting on the cutting machine is not secure, it can cause chipping along the edges and damage to the cutting tool during the machining process.
5. The magnitude of the vacuum suction force of the cutting machine.
Some panel‑cutting machines have vacuum‑suction tables with insufficient suction capacity, resulting in weak instantaneous clamping force on the workpiece during processing. This leads to board displacement and edge chipping.
Once you understand the causes of burr formation, all issues can be easily resolved. Keep the following four key points in mind.
1. Keep the cutting machine’s blades sharp; inspect them regularly and replace any dull blades promptly.
2. When purchasing and processing raw materials, pay close attention to quality differentiation. Conduct a trial run first. If the material quality is substandard, no amount of improvement will eliminate the issues; even if it is successfully processed into shape, the final furniture product’s quality will still be compromised.
3. Ensure that the spindle speed remains within the tool’s recommended range. If you’re unsure of the appropriate speed, consult the equipment manufacturer when purchasing the machine.
4. Be sure to choose a reputable manufacturer to ensure the vacuum table’s suction performance, or opt for a table that offers multiple clamping methods.

cause CNC cutting machine The presence of burrs on the edges of processed板材 is due not only to equipment quality, but also to factors such as tool sharpness, the material of the板材, the spindle speed of the cutting machine, the rigidity of tool clamping, and the strength of the machine’s vacuum suction. We believe that, based on the information above, you now know how to address this issue!
Keywords:
CNC cutting machine