Welcome to visit the official website of Shandong Sudiao Intelligent Equipment Co., Ltd.

 中文 | Admin  |  Home

The Practitioner of automation application solutions in the woodworking industry

Customized Production, Super Quality, Worry-Free Service

Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.

News Center

Contact Information

Business Department:

Sales Manager: Juan Liu

Tel : +86-531-88271994

Mob:+86-13305314695

E-mail:sales@sudiao.com

E-mail:juan@sudiao.com 

WhatsApp&weChat:

Juan: 0086-13305314695

Welcome to your consultation and corporation.

Contact us if you're interested in our products or you need technical support.

 

What are the causes of board‑slippage in a four‑station cutting machine?


Release Date:

2026-06-28 12:09

  As the CNC market continues to expand, Four-Process Cutting Machine It has become the equipment of choice for many furniture manufacturers; however, with numerous panel‑cutting machine suppliers on the market, product quality is often difficult to guarantee, which in turn leads to frequent board‑slippage issues in some four‑process panel‑cutting machines. The following sections outline several factors that contribute to this problem.

 Four-Process Cutting Machine

   1. The worktable of the four‑process cutting machine has poor suction performance.

  Generally speaking, a full large sheet may seem fine and go unnoticed, but as soon as it’s cut into smaller pieces, the adhesive strength becomes clearly apparent—poor adhesion can cause the panels to shift or come loose.

   2. The internal furniture design software of the cutting machine is suboptimal;

  An ill‑designed furniture‑design software can also cause material‑warping during panel processing. The choice of cutting location, the manner in which the blade is applied, and the precise point where the cut begins—all these details require careful consideration and cannot be left to arbitrary design decisions.

   3. Countertops are not cleaned promptly or thoroughly;

  After panel processing is completed, if the worktable is not cleaned or is inadequately cleaned, it can compromise the table’s suction force on the four‑station cutting machine, leading to panel slippage during the next machining operation.

   4. Replace the base plate promptly;

  The base board is the layer of particleboard placed on the worktable when operating the panel‑cutting machine. This equipment places significant wear on the base board, so it should be replaced promptly during operation. Failure to do so can lead to air leakage from the vacuum system, causing the workpiece to lift off the table.

   5. After installation, the guide rails and rack on both sides of the Y-axis are not in the same horizontal plane.

  This is a critical issue that cannot be corrected in later stages. During assembly, manual drilling of the contact surfaces between the Y-axis guide rail brackets and the machine bed resulted in misaligned holes, causing the two Y-axis guide rail brackets to sit at different heights after installation. When the equipment operates at high speeds, this leads to slight vibrations—imperceptible to the naked eye—but which can cause the carriage to drift.

  The aforementioned reasons and Four-Process Cutting Machine This is related to the occurrence of sheet‑material deviation. Of course, in addition to the equipment’s inherent quality, proper post‑purchase maintenance is equally important; the cutting machine should undergo regular servicing and upkeep to ensure its machining accuracy and service life.

Keywords:

Four-Process Cutting Machine