Welcome to visit the official website of Shandong Sudiao Intelligent Equipment Co., Ltd.

 中文 | Admin  |  Home

The Practitioner of automation application solutions in the woodworking industry

Customized Production, Super Quality, Worry-Free Service

Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.

News Center

Contact Information

Business Department:

Sales Manager: Juan Liu

Tel : +86-531-88271994

Mob:+86-13305314695

E-mail:sales@sudiao.com

E-mail:juan@sudiao.com 

WhatsApp&weChat:

Juan: 0086-13305314695

Welcome to your consultation and corporation.

Contact us if you're interested in our products or you need technical support.

 

Two Cooling Methods for the Spindle of a CNC Cutting Machine


Release Date:

2026-06-28 12:09

  If CNC cutting machine The spindle motor operates continuously at high frequency, causing it to heat up progressively—especially during the summer. When this issue arises, operators typically focus on the machine’s application settings, but few pay attention to the equipment itself, which can lead to spindle motor burnout. To prevent such problems, cooling systems are usually installed on the router’s spindle.

 CNC cutting machine

   Two cooling methods for the spindle cooling system of a cutting machine:

  1. Although the cooling system on the cutting machine’s spindle is only a small component, it significantly affects the overall operation of the machine. There are two types of spindle cooling: air cooling and water cooling.

  2. Generally speaking, domestically produced spindles are available in both air-cooled and water-cooled versions, while refrigerated spindles are predominantly imported brands. High‑quality spindles from countries like Germany and Italy often come equipped with advanced cooling systems, but these are seldom adopted due to the significant price gap compared to domestic models.

   Extension: Differences in Cooling Methods

  1. For most users of cutting‑machine tools, the key differences between air‑cooled and water‑cooled spindles lie in their price, noise levels, and freeze resistance. Compared with water‑cooled spindles, air‑cooled spindles tend to be noisier and more expensive. However, in regions with extreme winter temperatures—particularly in northern China and eastern provinces where sub‑zero conditions can drop as low as –40°C—it’s not uncommon for the coolant reservoir of a water‑cooled spindle to freeze. If the user fails to take precautions and starts the machine under such conditions, the spindle will quickly seize within minutes. In these cases, switching to an air‑cooled spindle can resolve the issue. Of course, adding an industrial antifreeze to the coolant system is also a viable option; the best choice ultimately depends on cost‑effectiveness and the specific needs of the manufacturer.

  2. Generally speaking, if there are no residential buildings near the customer’s factory, air‑cooled systems can be used; though they generate somewhat more noise, they typically do not disturb nearby residents. However, if the factory is located in a residential area, several air‑cooled CNC cutting machines operating simultaneously can produce significant noise. In such cases, it becomes necessary to switch to water‑cooled spindles.

  3. Aside from frost resistance issues, water-cooled spindles may be damaged by leaks. Although this is relatively uncommon, it remains a potential drawback.

  For choosing CNC cutting machine Users should select either an air‑cooled or water‑cooled spindle based on specific circumstances, such as their geographic location and production requirements. In short, choose equipment that best suits your own manufacturing needs, grounded in practical considerations.

Keywords:

CNC cutting machine