News Center
Contact Information
Business Department:
Sales Manager: Juan Liu
Tel : +86-531-88271994
Mob:+86-13305314695
E-mail:sales@sudiao.com
E-mail:juan@sudiao.com
WhatsApp&weChat:
Juan: 0086-13305314695
Welcome to your consultation and corporation.
Contact us if you're interested in our products or you need technical support.
What are the rapid positioning methods for CNC cutting machines?
Release Date:
2026-06-28 12:09
CNC cutting machine Positioning plays a crucial role throughout the entire furniture‑manufacturing process, as it directly affects the aesthetic quality of panel cutting. Therefore, before setting up the positioning on a panel‑cutting machine, it is essential to familiarize yourself with the material being processed. For workpieces requiring lower machining accuracy, you can manually adjust the tool position by eye and then establish the workpiece’s initial location. However, this method is prone to significant errors; hence, the following section introduces a rapid positioning technique for CNC panel‑cutting machines.

Positioning should begin with securing the material. Here, “securing” does not mean fastening the material with plywood; rather, it refers to properly aligning and placing the板材. When using a cutting machine, operate it correctly: align the板材, mount the straight blade onto the spindle, position the blade on the worktable, run it along one edge of the material, and use the direct gap between the material’s edge and the blade to ensure proper alignment. Once aligned, secure the material.
Then proceed to the next step to determine the original position of the material workpiece. The methods for determining the X and Y directions are identical, so only the X direction is described here.
First, use fine adjustments to slowly bring the tool close to the left side of the workpiece. Gently rotate the tool by hand until it just makes contact with the material. At this point, zero the X‑axis on the left side of the workpiece, then lift the tool and move it to the right side—aligning it with the right edge of the material that was just contacted—and record the X‑axis coordinate at this position.
Then, the typical location of this value is at the material’s center in the X direction, and similarly in the Y direction.
In this way, the center of the cutting machine in the X and Y directions can be determined, which serves as the workpiece’s origin.
Through the aforementioned methods, it is possible to use CNC cutting machine Accurate positioning ensures improved machining quality. We hope the above information has been helpful; for further inquiries, please continue to follow our website.
Keywords:
CNC cutting machine