News Center
Contact Information
Business Department:
Sales Manager: Juan Liu
Tel : +86-531-88271994
Mob:+86-13305314695
E-mail:sales@sudiao.com
E-mail:juan@sudiao.com
WhatsApp&weChat:
Juan: 0086-13305314695
Welcome to your consultation and corporation.
Contact us if you're interested in our products or you need technical support.
How can the issue of significant machining deviations between the front and back sides during material loading on a CNC cutting machine be resolved?
Release Date:
2026-06-28 12:08
When using CNC cutting machine When manufacturing custom furniture, customers often encounter this issue: after processing, they discover that the front and back groove positions do not align, making the cabinets difficult to install and non‑compliant with standards. So how can this problem be resolved?

Causes of significant machining errors on both sides and their solutions:
1. Workpiece coordinates are inaccurate.
Solution: Reset the workpiece coordinates for the X and Y axes, provided that the diagonal and positioning cylinders have already been adjusted; otherwise, the adjustment will be ineffective.
2. Spindle misalignment is incorrect. Improper cutting and other spindle deviations can cause positional errors. In such cases, overall deviations in grooving and punching typically occur. Even when only the front side is machined, the positions of grooves and punches are still inaccurate—not merely a deviation between the front and back sides. This issue commonly arises on multi‑station blanking machines.
Solution: Adjust the spindle offset, and perform sequential drilling at the same location using multiple spindles to determine the deviation value.
3. Diagonal accuracy is poor. If the CNC cutting machine exhibits excessive diagonal deviation, you may observe that the initial hole‑punching and slot‑cutting positions are highly accurate, but the deviation progressively increases as you move toward the end of the cut.
Solution: Adjust the diagonal. For 1200×2400 mm large panels, the diagonal deviation shall not exceed 0.5 mm.
4. Causes of misalignment in the positioning cylinders. The front‑side positioning cylinder and the left‑side positioning cylinder of the cutting machine fail to form a 90° angle, resulting in misaligned板材 during placement. While this issue has little impact on single‑sided processing, it is critical for double‑sided processing.
Solution: Adjust the positioning cylinder and ensure the spindle moves in a straight line; then verify that the positioning cylinder operates along that straight path. Note that the diagonal alignment must be properly set—otherwise, any adjustments will be futile.
5. Excessive machine clearance. If the errors during operation of the CNC panel saw are too large, it can also result in inaccurate positioning of individual holes.
Solution: Adjust the rack clearance and the reducer clearance, and replace the slider.
For CNC cutting machine During operation, if significant front‑to‑back registration errors occur, the first step is to identify the specific root cause based on the actual conditions. Only then can targeted corrective measures be implemented to resolve the issue promptly, minimizing adverse impacts on production.
Keywords:
CNC cutting machine