News Center
Contact Information
Business Department:
Sales Manager: Juan Liu
Tel : +86-531-88271994
Mob:+86-13305314695
E-mail:sales@sudiao.com
E-mail:juan@sudiao.com
WhatsApp&weChat:
Juan: 0086-13305314695
Welcome to your consultation and corporation.
Contact us if you're interested in our products or you need technical support.
Which is better: a four‑process cutting machine or a straight‑line tool‑changing machining center?
Release Date:
2026-06-28 12:08
Four-process cutting machine The straight‑line tool‑change machining center and the in‑line tool‑change machining center are currently two of the most widely used CNC panel‑processing machines on the market. When making their first purchase, many furniture manufacturers often find themselves torn over which of the two is easier to use.

The four‑station cutting machine is equipped with four high‑power spindles and features pneumatic tool‑change capability, enabling automatic slotting, reaming, material cutting, and material ejection. The in‑line tool‑change machining center boasts a 12‑tool turret, offering rapid tool changes, minimal rail wear, and significant time savings. Both models are capable of processing cabinet carcasses and door panels.
Differences between a four‑process cutting machine and a straight‑line tool‑change machining center:
1. Differences in configuration and tool-changing methods
The primary configuration difference between the two models lies in the spindle: the four‑station panel saw features four spindles, each rated at 6 kW, whereas the straight‑line model has a single spindle motor, typically rated at 9 kW. As such, the straight‑line model’s spindle power and speed are significantly higher than those of the four‑station unit.
In terms of tool-changing methods, the four‑station machine uses pneumatic tool changes, whereas the straight‑line material feeder selects different tools by having the spindle automatically grip a collet from the tool magazine.
2. Usage and After-Sales Costs
Generally speaking, straight‑line tool‑change machining centers are more expensive than four‑station machines. A straight‑line model typically costs around 150,000, while a four‑station machine hovers around 100,000. However, in actual operation, there is no significant cost difference between the two. The main distinction is that a straight‑line machining center requires the purchase of additional tools.
The difference in after-sales costs is primarily due to the varying prices of the spindles for the two machines; during repair and replacement, the spindle motor for the straight‑line panel saw is 2 to 3 times more expensive than that of the four‑process panel saw.
3. Comparison of processing speeds for the same path
Under identical equipment settings, when machining板材 of the same material along the same toolpaths—covering fastener holes, embedded‑part holes, wood‑cutting holes, and back‑panel groove cuts—the four‑process operation achieves a higher throughput than the straight‑line tool‑change machining center.
Thus, it can be seen that if only the cabinet body is available or the cabinet body is relatively large, then one should choose… Four-process cutting machine . If door panel machining is required, or if the workload for door panels is substantial, a straight‑line machining center should be selected. Moreover, with the growing popularity of concealed components, four‑process machines generally use fewer cutting tools and are therefore less advantageous than… Vertical machining center with in-line tool changer Its advantages are significant. Therefore, in the actual selection process, you should base your decision on your specific needs; only equipment that meets your production requirements will be truly effective.
Keywords:
Four-Process Cutting Machine