Welcome to visit the official website of Shandong Sudiao Intelligent Equipment Co., Ltd.

 中文 | Admin  |  Home

The Practitioner of automation application solutions in the woodworking industry

Customized Production, Super Quality, Worry-Free Service

Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.
Shandong Suku Intelligent Equipment Co., Ltd.

News Center

Contact Information

Business Department:

Sales Manager: Juan Liu

Tel : +86-531-88271994

Mob:+86-13305314695

E-mail:sales@sudiao.com

E-mail:juan@sudiao.com 

WhatsApp&weChat:

Juan: 0086-13305314695

Welcome to your consultation and corporation.

Contact us if you're interested in our products or you need technical support.

 

When is the optimal time to replace the cutting tools on a panel furniture production line?


Release Date:

2026-06-28 12:07

  Now, furniture manufacturers are all moving toward intelligence and automation, among which… Panel furniture production line It has become an effective springboard. Over prolonged use, the cutting tools on furniture production lines inevitably wear down; if they are not replaced promptly, both the efficiency and quality of panel‑cutting will be significantly compromised. So, when is the optimal time to replace the cutting tools on a panel‑type furniture production line?

 Panel furniture production line

  1. Examine the cutting tool. When machining ductile materials, flank wear predominates, as the chip comes into contact with the rake face, leading to crescent‑shaped wear. For brittle materials, the contact length between the chip and the rake face is shorter, and the relative roundness of the insert can result in more pronounced flank wear. When machining steel under boundary‑lubrication conditions, deep grooves typically form on the flank face, with the primary cutting edge close to the workpiece surface and the auxiliary cutting edge near the tool tip.

  2. Inspect the machining process. If intermittent or irregular sparks occur during machining, it indicates that the cutting tool has worn out; replace the tool promptly based on its average service life.

  3. Examine the color and shape of the metal chips. If the chip color changes, it indicates a shift in the machining temperature, which may be due to tool wear. Based on the chip morphology, features such as serrated edges, abnormal curling, or increased fineness can serve as indicators of tool wear. These observations provide a basis for assessing tool degradation.

  4. Examine the workpiece surface. If there are bright marks but little change in surface roughness or dimensions, this indicates that the cutting tool has already worn out.

  5. Listen for unusual sounds. Increased machining vibration is a sign of tool wear. When the cutting edge is dull, it will produce abnormal noise. Always take care to avoid “tool chatter,” which can render the workpiece scrap. For example, if severe burrs, reduced surface finish, or dimensional deviations appear during cutting, these are clear indicators of tool wear.

  All of the above are Panel furniture production line These are common forms of tool wear. However, since customers process different materials in their daily operations, the types of tool wear can vary. Customers should regularly observe and analyze these patterns; over time, they will learn to assess the extent of tool wear. Once wear becomes apparent, tools should be replaced promptly to prevent delays in production.

Keywords:

Panel furniture production line