News Center
Contact Information
Business Department:
Sales Manager: Juan Liu
Tel : +86-531-88271994
Mob:+86-13305314695
E-mail:sales@sudiao.com
E-mail:juan@sudiao.com
WhatsApp&weChat:
Juan: 0086-13305314695
Welcome to your consultation and corporation.
Contact us if you're interested in our products or you need technical support.
Why is the CNC cutting machine experiencing board drift? What are the underlying causes?
Release Date:
2026-06-28 12:15
CNC cutting machine It can be said to be an indispensable piece of equipment for today’s panel furniture industry, widely purchased and used by many furniture manufacturers. This product is truly a boon for furniture production: on the one hand, its ability to boost efficiency is self‑evident, and it also provides robust quality assurance. However, board‑running issues do arise—so what are the primary causes of this problem? Let’s take a closer look at the underlying reasons.

1. The machine itself has poor suction; the fixed suction force across the entire board is not a major issue, but it fails to hold small workpieces during machining.
2. During machining, the toolpaths generated by the software may be suboptimal. The process should follow this sequence: first cut the smaller panels, then the larger ones, and finally address seams without joints—meaning that smaller panels should be routed from the outer edge toward the center. The principle of compliance dictates that the product relies not on its own adhesive force but on auxiliary fixation provided by other panels. Note: When working with solid wood, pay particular attention to the material’s texture.
3. Inadequate post‑processing cleaning leaves debris on the work surface, preventing effective contact between the product and the floor. Air leakage reduces friction, leading to board slippage.
4. During machining, excessive overcutting by the tool leaves grooves of varying depths on the worktable’s base plate, which can cause air leakage during operation. This results in reduced suction between the material and the base plate, as well as a smaller contact area. According to the formula for frictional force per unit area, friction equals the coefficient of friction multiplied by the normal pressure; if the contact area decreases and the normal pressure is reduced, the frictional force will likewise diminish. When the cutting resistance remains constant but the frictional force falls below it, the workpiece may drift or shift.
5. The rationality of the table‑top structure determines the effectiveness of vacuum adsorption. For a given pump power, the adsorption performance varies across different table surfaces.
6. Improper blade selection and severe blade dulling result in high cutting resistance.

And then it is... CNC cutting machine Analysis of the “running plate” phenomenon. We hope this will help you clearly understand the root causes of the issue and take proactive measures to prevent it from occurring in the first place. Moreover, we sincerely hope that the information provided above will enable you to enhance your equipment’s production efficiency more effectively.
Keywords:
CNC cutting machine